MB839SP-B
The ToughArmor MB839SP-B is a rugged mobile rack that allows 2.5" SATA SSDs or HDDs to be used in PCIe 2.0 x1 slots. It supports hot-swapping for easy drive management and provides a reliable solution for expanding storage capabilities.
£49.99
- Brand: Icy Dock
- SKU: 4713227445214
- Shipping:
Learn More
ToughArmor MB839SP-BIntroducing the ToughArmor MB839SP-B rugged removable drive bay for 2.5” SATA hard drives and SSDs (9.5mm height). Utilizing the standard PCIe 2.0 interface and taking only a single PCIe expansion slot, the MB839SP-B gives you an additional hot-swappable drive bay for hard disk drives (HDDs) and solid state drives (SSDs) even when your computer does not have an open SATA port or empty drive bay. Because the single PCIe port handles both power and data, there’s no additional clutter from SATA data and power cables. Fully supports hot-swapping drives with its removable drive tray.
Convenient Hot Swap SupportMB839SP-B adds full hot-swap support over the PCIe 2.0/3.0 interface, allowing you to add or remove drives in seconds without having to shut down the computer or open the case. Hot-swap supports prevents downtime when upgrading storage or replacing a failed drive, and allows a technician to work more efficiently. Hot-Swap ready connector rated for 10,000 insertion / removal cycles allows drives to be installed, removed, and replaced without shutting down the system.
Efficient Storage SolutionAdd an additional HDD or SSD to your desktop computer by utilizing your unused PCIe expansion slots. Using the PCIe interface lets you exceed your computers usual drive limitations by giving you an extra removable SSD/HDD drive bay.
ToughArmor MB839SP-B is designed for the PCIe 2.0 and 3.0 single-channel (x1) interface, and for maximum compatibility, it’s also compatible with PCIe x4, x8, and x16 full-length PCIe slots.
The Protection You NeedRuggedized full-metal chassis, tray, and mounting bracket help to ensure a long product life, and further aid in heat dissipation. An anti-vibration mechanism built into the chassis reduces noise and protects against environmental damage.
Large ventilation holes on both sides of the enclosure work with your systems cooling system to keep your drives cool under load. The single-slot width is narrow enough to enable cooling even when multiple bays are installed side-by-side.
An LED is installed into the tray of the mobile rack to provide drive status information at all times. When a drive is currently installed, a solid green light will indicate power is being provided to the drive, and a blinking green light indicates drive activity.
For easier drive status monitoring, connect your computers/server drive power/access LED light to the 2-pin HDD status header (cable not included), to easily see when your drive is in use from the front of the computer.
Packed with FeaturesUtilizing the PCIe 2.0 interface allows for a huge speed improvement over older PCs and Mac Pro 2008-2012 models which only natively support SATA II speeds, allowing you to take advantage on the huge speed improvements of modern SSDs.
Utilizing the PCIe 2.0 interface provides power and data transfer at the same location which ultimately reduce cable clutter in a PC case.
Enhance Security with Our Lockable Drive TrayIf your application demands added physical security to protect valuable data from theft, you can upgrade with the compatible lockable drive tray MB996TK-B for an instant security boost to your MB839SP-B. For bulk orders of MB839SP-B pre-equipped with lockable drive trays, reach out to our sales team at sales01@icydock.com (Minimum Order Quantity applies).
ToughArmor MB840M2P-B for M.2 NVMe SSDIf you are looking to install an M.2 NVMe SSD through a PCIe slot, ICY DOCK got you covered! ToughArmor MB840M2P-B is compatible with the PCIe 3.0 slot or above and offer data transfer speed up to 32Gb/s!
Customizable ICY DOCK Drive Enclosures: Tailored to Meet TAA & UL Certification Standards and More!At ICY DOCK, we understand the paramount importance of adhering to various industry and safety standards. While our standard products are already crafted with the highest quality in mind, we also provide our customers with the option to customize ICY DOCK drive enclosures and mobile racks to meet their specific certification requirements. This includes standards such as TAA and UL to wide temperature tests.
Our dedicated team is fully prepared to adjust product materials and designs to ensure complete compliance. Furthermore, we offer comprehensive guidance to our clients throughout the certification process. Our goal is to not only meet precise specifications but also ensure that our products successfully pass stringent tests. Below, you'll find a detailed table listing all the optional certifications that can be tested with our customizable solutions.Optional Certifications Available for ToughArmor MB839SP-B TAA Trade Agreements Act Compliance UL Safety Standard Certification UL94 Flammability of Plastic Materials FCC Federal Communications Commission Compliance Wide Temperature MIL-STD-810H - Method 501.7 & 502.7 Customizing ICY DOCK products for specific certifications involves fees for the creation of the certificates, including necessary testing. Please note that some certificates may require recurring fees to remain valid. For more details and inquiries,please contact us at tech@icydock.comMain Features• Compatible with Mac Pro 2008-2012 models with no driver required • Fits 1x SATA hard drive or SSD from 7mm to 9.5mm in height • Uses PCIe 2.0 x1 interface, also supports installation into PCIe 2.0 and PCIe 3.0 x1, x4, x8, and x16 slots • Installs into single-width PCIe expansion slot • PCIe interface provides both power and data transfer which ultimately reduce cable clutter • Narrow design allows for multiple bays to be installed side-by-side in a modular design • Includes full-height PCIe faceplate to protect against buildup of dust • Strong hot-swap connector rated for a minimum of 10,000 insertion/removal cycles • Eagle-hook lock system keeps the drive secure in the enclosure • EMI Grounding – protects hard drives from electrical damage • Anti-Vibration Technology (AVT) reduces noise and protects against environmental damage • Active Power Technology (APT) saves power by shutting the device down when no drive is installed. • Industry leading 5 years limited warranty against all defects • Complimentary support from professionally trained US-based technical support agents SpecificationModel Number： MB839SP-B Color： Black Support Drive Size： 1 x 2.5" SSD / HDD Compatible Drive Type： SATA Number of Drives： 1 Max Drive Height： 9.5mm Drive Bay： 1 x PCIe 2.0 expansion slot Host Interface： PCIe 2.0 x1 or above Power Input： PCIe 2.0 Transfer Rate： Up to 500MB/s (depending on hard drive speed) Support HDD Capacity： No limitation Drive Cooling ： Metal heat dispersion with passive cooling Structure / Material： Metal with partial ABS plastic Support Hot-Swap： Yes Product Dimension (W x H x D)： 154 x 122 x 22mm Product Net Weight： 195g Package Gross Weight： 277g Drive Activity LED Indication： Drive power: solid green; Drive access: flashing green Package Contents： Device, user manual, screws SATA Connector Insertion Rate： 10,000 Humidity： 5%~65% RH Operating Temperature： 0°C to 60°C (32°F to 140°F) Storage Temperature： -35°C to 70°C (-31°F to 158°F) Compliance： CE, RoHS, REACH Warranty： 5 years limited warranty FAQQ: Does MB839SP-B support the new SATA 3.3 / SAS 3.0 Power Disable feature (PWDIS)?
A: The MB839SP-B does not support the SATA 3.3 / SAS 3.0 PWDIS feature. If you install the SATA/SAS HDD/SSD with PWDIS in MB839SP-B , the drive will not spin, and the system won't detect the drive. See the list below for known SATA/SAS HDD/SSD with the PWDIS feature.
While we recommend to avoid using the SATA/SAS HDD/SSD with PWDIS, you can use the methods below to disable the PWDIS feature physically if you already purchased the drive:
Method 1 – Using the Molex to SATA adapter or cable to disconnect the power to Pin 3 of the SATA power connector.
Molex to SATA Adapter Molex to SATA Cable Method 2 – Placing Kapton tape on Pin 1-3 of the SATA/SAS power connector to isolate the 3.3V power, as shown below.
Please contact tech@icydock.com if the problem persists.
Q: I want to see the drive status from the front panel on PC case/chassis. What should I do?
A: There is a 2-pin front panel header(s) on the PCBA of the product. The drive status can be displayed from the front panel after connecting the front I/O wire to the corresponding 2-pin header of the product. For detailed connected methods, please refer to the user manual of the PC case/chassis.
Drive Status LED Indication Power Solid Light Drive Access Flashing Light Note: The I/O wire connected to the PC case/chassis are not included in the product package.
ReviewsRelated Articles
